Contact
Feedback
Chinese
Fasteners Products
Home
›
Fasteners
Return
Bolts
Screw
Nut
Washer
Pin
Nail
Rivet
Threaded Rod
Custom & Special
Bolts
Bolted joints are one of the most common elements in construction and machine design. They consist of cap screws or studs that capture and join other parts, and are secured with the mating of screw threads.
Hex Bolt
Carriage Bolt
Hex Socket Head Cap Screw
Flange Bolt
Hex Cap Screw
Lifting Eye Bolt
Thread Stud
Eye Bolt
T Head Bolt
Flat Countersunk Nib Bolt
Hex Socket Countersunk Head Screw
Hanger Bolt
Plow Bolt
Anchor Bolt
Hex Head Coil Bolt
Connector Bolt
Elevator Bolt
Heavy Hex Bolt
Hex Lag Screw
J Bolt
Square Head Bolt
Step Bolt
Structural Bolt
Tap Bolt
Timber Bolt
Toggle Bolt
U Bolt
L Bolt
Screw
Threaded fasteners either have a tapered shank or a non-tapered shank. Fasteners with tapered shanks are designed to either be driven into a substrate directly or into a pilot hole in a substrate. Mating threads are formed in the substrate as these fasteners are driven in. Fasteners with a non-tapered shank are designed to mate with a nut or to be driven into a tapped hole.
Tapping Screw
Wood Screw
Machine Screw
Coach Screw / Hex Lag Screw
Drive Screw
Drywall Screw
Eye Screw
Chipboard Screw
Flooring Screw
Furniture Screw / Confirmat Screw
Jack Screw
Self-Drilling Screw
SEMS Screw
Sheet Metal Screw
Thread cutting Screw
Thumb Screw
Wing Screw
Set Screw
Concrete Screw
Flange Screw
Nut
A nut is a type of hardware fastener with a threaded hole. Nuts are almost always used opposite a mating bolt to fasten a stack of parts together.
Hex Nut
Square Nut
Wing Nut
Round Nut
Nylon Insert Lock Nut
Lifting Eye Nut
PalNut
Hex Flange Nut
Cage Nut
Castle Nut
Coil Nut
Coupling Nut
Heavy Hex Nut
High Nut
Hex Jam Nut
Knurled Nut
K-Lock Nut
Machine Screw Nut
Slotted Nut
Spring Nut
Tee Nut
Cap Nut
Washer
A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener. Other uses are as a spacer, spring (belleville washer, wave washer), wear pad, preload indicating device, and locking device.
Flat Washer
Split Lock Washer
Externally Toothed Lock Washer
Internally Toothed Lock Washer
Belleville Washer
Bounded Sealing Washer
Bushing
Conical Washer
Fender Washer
Finishing Washer
Hillside Washer
Structural Washer
Wave Washer
Taper Washer
Square Washer
Pin
A pin is a device used for fastening objects or material together. It is usually made of steel, or on occasion copper or brass. It is formed by drawing out a thin wire, sharpening the tip, and adding a head.
Cotter Pin / Split Pin
Clevis Pin
Dowel Pin
Lynch Pin
Safety Pin
Snapper Pin /Tab Lock Pin
Taper Pin
Groove Pin
Hitch Pin
Nail
In engineering, woodworking and construction, a nail is a pin-shaped, sharp object of hard metal or alloy, formerly wrought iron, though today a modern alloy of steel is common, used as a strong fastener.
Concrete Nail
Roofing Nail
Framing Nail
Brad Nail
Nail with PVC Head
Coil Nail
Common Nail
Rivet
Linkage offers a nail for any occasion. Available in various lengths, diameters, finishes, and materials. Fastenal nails are durable assuring a lasting hold for any project.
Bland Rivet
Open End Blind Rivet
Closed End Blind Rivet
Peel Type Blind Rivet
Multi-grip Rivet
Threaded Rod
Linkage offers rod for any occasion. Available in various lengths, diameters, finishes, and materials. Approved rods are durable assuring a lasting hold for any project.
Threaded Rod
Custom & Special
Anchors, bolts, hardware, nails, nuts, pins, clips, rivets, rod, screws, sockets, clamps, hangers, washers, and more.
Miscellaneous
Custom and special bolt,nail,nut,pin,rod,screw
Copyright
-
Privacy policy
Copyright©2006-2025 Linkage Industry Co., Ltd..
Linkage Industry Co., Ltd.
Skype
Facebook
LinkedIn
Hong Kong
Flat/Rm A 20/F Kiu Fu Comm. Bldg, 300 Lockhart Rd, Wan Chai, HK
Shanghai
Room 2604A, Huaning Plaza South Tower, No. 300 Xuanhua Road,Shanghai, 200050, China.
Telephone: 86-21-51061942 Fax: 86-21-51069302